The overlay puts spiderwebs in the corners or along the edges of your stream. A web fans out in strands from where it starts, with sagging rings across them, and each web can have a spider that dangles from it on a thread, letting the thread out and winding it back in. It is drawn by the page itself, with no pictures to download, over a transparent background. It needs no account and no key, and it asks no other service for anything.
Build it
Open the Spiderweb Corners builder, from the Tools page or from the Halloween & Autumn section of Seasonal tools. Both lead to the same builder. The preview at the top is the real overlay. Change a setting and it reloads a moment later. Every setting has a starting value, so Copy URL and Open always work. See Add a tool to OBS for the browser source.
The webs
- Where the webs start
- Any of the four corners and the four edges, and the start is the two top corners. A corner web fans a quarter circle across the frame, along both edges of the corner. An edge web fans a half circle from the middle of the edge. Each place you pick gets its own web, and at least one place stays picked.
- Color
- The color of the threads. The start is a pale grey-white, like silk. An orange or a purple looks spookier.
- Size
- From 1 to 100. The start is 50. How far each web reaches into the frame, from about a fifth of the frame’s shorter side up to over half of it. A web from an edge never reaches past the ends of that edge.
- Density
- From 1 to 100. The start is 50. How many strands and rings each web has, from a loose web to a fine one.
- Opacity
- From 1 to 100. The start is 60. How solid the threads look, from a faint trace to a bright web.
The spiders
- A spider hangs from each web
- On at the start. Each spider hangs from the rim of its web on a thread that lets out and winds back in, and it swings a little as it goes. The thread never grows long enough to take the spider out of the frame. With this off the webs are drawn once and then nothing moves at all.
- Speed
- From 1 to 100. The start is 50. How fast a spider lets out and winds in its thread. At 1 a round takes about sixteen seconds. At 100 it takes about five. Each spider starts at its own point in the round, so they do not move together.
Landscape and portrait
Set the browser source to the size of your stream’s frame, such as 1920 by 1080 for landscape or 1080 by 1920 for portrait. The webs and the spiders are sized from the frame, so they look alike in both. In the builder, Landscape and Portrait only change the shape of the preview, and they are not part of the link.
Performance
- The webs are drawn once, on their own layer, and again only if the frame is resized. They do not move.
- With spiders off nothing runs after that. With spiders on, only the narrow strip each spider hangs in is cleared and drawn again, not the whole frame.
- The animation stops while the page is hidden, such as a browser source that is not shown, and carries on when it is shown again.
Use it with other overlays
Spiderweb Corners is its own browser source. It does not depend on any other seasonal overlay, so you can add it beside Spooky Fog, Flying Bats or any other overlay as separate sources and stack them in the order you like.
Advanced: change it in the link
Everything the builder does is a setting in the link after the #. Your browser does not send that part to our server. Only settings you change are written, so a link with no settings at all is the starting overlay.
| Setting | Values | Starts as |
|---|---|---|
where | places separated by commas: tl, tr, bl, br for the corners, and top, bottom, left, right for the edges | tl,tr |
color | a color such as e6ebf2 | e6ebf2 |
size | 1 to 100 | 50 |
density | 1 to 100 | 50 |
opacity | 1 to 100 | 60 |
spiders | 1 for a spider on each web, 0 for none | 1 |
speed | 1 to 100 | 50 |
A setting that is missing or not valid takes its start value, a number outside its range is held to the nearest end of it, and in a list of places a name that is not a place is ignored.